Hook-and-loop fastener
Nylon hooks little more than a millimetre tall stand in rows on one tape of a hook-and-loop fastener, and soft loops cover the other tape. Pressed face to face, the two tapes hold wherever a hook finds a loop. Peeled apart, they let go a few hooks at a time, with a tearing sound.
Hooks on one tape, loops on the other
Run a thumb over the two halves of a hook-and-loop fastener and they feel nothing alike. The hook tape is stiff and scratchy. The loop tape is soft. Both tapes are woven. On one pair both are polyamide, which is nylon, and the hook tape is 1.70 to 2.05 mm thick, the loop tape 2.10 to 2.60 mm. European standards call the pair a touch and close fastener. Velcro is a trade name for it.
On one hook tape 16 mm wide, each hook stood about 1.2 mm tall and was 0.23 mm thick. Its rows lay 1.43 mm apart, with 10 and 11 hooks across in turn. That makes about 46 hooks to a square centimetre. The loops are made of yarn of many filaments, brushed so that each loop spreads into a fan, with about 1000 loops to a square centimetre in one patent’s example.
Fig. 1 cuts along the two tapes, through one hook of each row. Guess, before peeling the loop tape off, how many hooks bear the pull at any one moment.
One hook at a time
What the drawing shows
The pull falls mostly on the hook at the front of the peel, and the caught hooks ahead of it carry little until the front reaches them. That hook’s loop pulls on the inside of its crook, and the hook bends like a small beam. As the pull grows, the crook opens and the loop slides toward the tip. When the tip has turned about 40°, the loop slips off and the hook springs back. Then the next caught hook takes over. In peel tests single hooks let go at 0.60 N on average, with a spread of 0.24 N. Just before they did, each hook and its loop was as stiff as a spring of about 2,100 N/m. At that stiffness a pair gives about 0.29 mm before the loop comes free. Friction counts for little: a silicone spray barely changed the force.
On a real tape the front is a whole row wide. About half the hooks were caught, so a 16 mm tape meets about five at a time. Five hooks at 0.6 N make 3 N, and 3 N is what peeled that tape at a right angle. A trace of the force looks like a row of teeth, with one sudden drop for each hook let go. The sound comes from those snaps, by way of the backing. Recorded alone, one hook and loop coming apart gave no tone, only a hiss. A tearing strip shakes the backing it is fixed to, and that shaking is most of the noise. The same fastener fixed to an aluminium plate sounded quite different.
Peeling against sliding
A peel meets the hooks a row at a time, while a pull along the tapes meets every caught hook in the overlap at once. De Mestral’s 1961 patent says this of his first fabric, hooks against hooks: parting needs “a force of a considerable magnitude” when many hooks let go together, but is “quite readily effected by progressively peeling the layers apart”.
The data sheet for one woven pair gives both. Peel averages 2.0 N for each centimetre of width, under EN 12242. Shear averages 10.3 N for each square centimetre of overlap, under EN 13780, which takes the highest force per unit area that slides the two tapes apart. A straight pull apart averages 5.5 N a square centimetre. Width alone sets the peel. In Fig. 2 the strip is 2.5 cm wide. As you lengthen its overlap, which of the two forces do you expect to grow?
What the drawing shows
Only the slide grows, in step with the overlap, because each extra centimetre brings more hooks to share it. The peel stays at 5 N however long the overlap, since only the hooks at its front are pulling. At 5 cm the strip holds about 129 N against a slide, about 26 times the peel. At 0.6 N a hook, that is the work of some 215 hooks against 8.
Velvet with hooks
George de Mestral, of Prangins in Switzerland, applied on 15 October 1952 for US Patent 2,717,437, “Velvet type fabric and method of producing same”. It was granted on 13 September 1955 and assigned to Velcro S. A. of Fribourg. Its Swiss application is dated 22 October 1951. He wove extra warp threads of nylon over small metal bars and heated the bars, so that the loops kept their shape. A knife running in a groove along each bar cut the loops open. One side of each cut loop kept a hook, and the other stood straight. Two such pieces, one turned through 90° and laid pile to pile, held hook to hook. Because the hooks to a square inch “may be high”, he wrote, the pieces held well, and parting them took “some energy”. He meant them for garments and curtains, in place of slide fasteners, buttons and press buttons, and for brushes too.
His patent of 21 November 1961, US 3,009,235, says only about 30% of the hooks caught when a layer of 120 hooks to a square centimetre met another like it. A hooked layer on terry or uncut velvet held far better. That patent cuts the loops with a comb of blades, like a hair clipper, so that only one leg of each loop is cut. A belt closed this way needs no buckle or holes, he wrote, and can fasten at any point along its length. Both patents are later than 1930, so their drawings are not shown here.
When a closure tires
Data sheets count a closure’s life in openings. One woven pair is rated at 5,000 openings and closings before it loses half its first peel strength. Another keeps half its minimum figures after 10,000. Nylon also holds less when it stays wet, and recovers when dry. Sunlight wears it down.
People who use these closures describe the wear itself. One Stack Exchange answer, a user report, says the hooks relax and lose their shape, and a loop can open out until it holds nothing. Reddit replies, also user reports, blame frayed and split loops, and lint packed in among the hooks so they cannot reach a loop. A fleece that clings to a hook tape shows that hooks catch other fibres too, as one more answer reports.
Some fasteners have no hooks at all. In 3M’s Dual Lock both tapes carry polypropylene stems with mushroom-shaped heads, about 250 to a square inch on the grade tested. Neither tape has loops. Two pieces of the same tape snap together when pressed. Each pair of heads let go at about 0.45 N.
What the drawings leave out
The sizes are the drawing’s own. Each row of Fig. 1 is one hook seen from the side, where a real tape has hooks and loops tangled every way. Its loops are neat, and which hooks catch one is a fixed choice, half of them. Every hook lets go at the same 0.60 N with its tip turned the same 40°. In tests the force spread, and a model of one hook gives 0.30 to 0.66 N as the loop’s angle of pull moves by 15° either way. Only the front hook bears a load in the drawing, while on a tape the next few carry a little. The peel runs at a right angle, as in the tests.
Fig. 2 stretches one pair’s averages over every overlap, though they were measured on test pieces of one size. Its count of hooks supposes 0.6 N for each hook in a slide, as in a peel.
Sources
Read in November 2026.
- G. de Mestral, US Patent 2,717,437, “Velvet type fabric and method of producing same”, 13 September 1955, for the hooked velvet.
- G. de Mestral, US Patent 3,009,235, “Separable fastening device”, 21 November 1961, for hooks on loops and the counts.
- J. A. Williams, S. G. Davies and S. Frazer, “The peeling of flexible probabilistic fasteners”, Tribology Letters, 2007, for the hooks’ sizes, their release and Dual Lock.
- J. Cesonis, A. Agarwal, C. B. Palma and A. V. G. Cavalieri, “Acoustics of tearing Velcro”, 2016, for the sound.
- Velcro Companies, data sheets for Hook 088 and Loop 001, 2023, and Velcro USA, Hook 88 and Loop 1000, 2013, for the tapes, their strength and their life.
- BSI, BS EN 13780:2003 and BS EN 12242:2000, for the two tests.
- Lifehacks Stack Exchange, answers to “‘Softening’ a Velcro closure”, May 2024, and “Defusing hook and loop fastener’s dangers to other materials”, November 2017. User reports.
- r/explainlikeimfive, “ELI5: Why does velcro become loose after a while and does not stick as tight as before?”, September 2020, via the Arctic Shift archive. User report.
The type is Playpen Sans by TypeTogether, under the SIL Open Font License 1.1.